#1 Misc » How To Maintain Your New Car » Yesterday 09:54:25

local429
Replies: 0

How To Maintain Your New Car?
One of the reassuring qualities of contemporary cars is that they need much less-frequent service to keep them running well. Changing the spark plugs, breaker points, and condenser used to be a seasonal exercise, and body rust was accepted as a normal if unfortunate hazard of aging. Now many spark plugs can go 100,000 miles between changes. Electronic ignition has done away with the points and condenser. Chassis, suspensions, and even some transmissions are lubed for life. And factory rust-through warranties typically run six years or longer. What’s more, reliability has improved significantly. The result is that most late-model cars and trucks should be able to go 200,000 miles with regular upkeep.
201706092424.jpg
When you buy a new car, you may ask how to maintain your new car and want to prolong your car’s life.
Here are a few simple, periodic checks and procedures you can do that will help you get there.
1. Check the engine oil
The first key way to maintain your new car is checking the engine oil regularly—monthly for a vehicle in good condition; more often if you notice an oil leak or find you need to add oil routinely. The car should be parked on level ground so you can get an accurate dipstick reading. Don’t overfill. And if you do have a leak, find and fix it soon.
2. Check tire air pressure
The second key way to maintain your new car is checking tire air pressure once a month and before any extended road trips, use an accurate tire-pressure gauge to check the inflation pressure in each tire, including the spare. Do this when the tires are cold (before the vehicle has been driven or after no more than a couple of miles of driving). Use the inflation pressure recommended by the vehicle’s manufacturer, not the maximum pressure embossed on the tire’s sidewall. The recommended pressure is usually found on a placard on a front doorjamb, in the glove compartment, or in the owner’s manual. Also be sure to inspect tires for abnormal or uneven wear, cuts, and any sidewall bulges you can see.
3. Give it a wash
The third key way to maintain your new car is to try to wash the car every week, if you can. Wash the body and, if necessary, hose out the fender wells and undercarriage to remove dirt and road salt. It’s time to wax the finish when water beads become larger than a quarter
Meanwhile, when your car running for 20000miles, there other things you need to pay attention.
For normal driving, many automakers recommend changing the engine oil and filter every 7,500 miles or six months, whichever comes first. This is sufficient for the majority of motorists. For “severe” driving—with frequent, very cold starts and short trips, dusty conditions, or trailer towing–the change interval should be shortened to every 3,000 miles or three months. (Check your owner’s manual for the specific intervals recommended for your vehicle.) Special engines such as diesels and turbocharged engines may need more-frequent oil changes.
201706093451.jpg
1. Check the air filter
Remove the air-filter element and hold it up to a strong light. If you don’t see light, replace it. Regardless, follow the recommended service intervals.
2. Check the constant-velocity-joint boots
On front-wheel-drive and some four-wheel-drive vehicles, examine these bellowslike rubber boots, also known as CV boots, on the drive axles. Immediately replace any that are cut, cracked, or leaking. If dirt contaminates the CV joint it can quickly lead to an expensive fix.
3. Inspect the exhaust system
If you’re willing to make under-car inspections, check for rusted-through exhaust parts that need replacing. Also tighten loose clamps. Do this while the car is up on ramps. If a shop changes your oil,What Qualifications Of Oxyhydrogen Generator Should Possess, have them make these checks. Listen for changes in the exhaust sound while driving. It’s usually advisable to replace the entire exhaust system all at once rather than to repair sections at different times.
20170608110655.jpg
4. Look at the brakes
For most people it makes sense to have a shop check and service the brakes. If you handle your own brake work, remove all wheels and examine the brake system. Replace excessively worn pads or linings, and have badly scored rotors or drums machined or replaced. The brakes should be checked at least twice per year; more often if you drive a lot of miles.
5. Check the fluids
On many newer cars, the automatic transmission is sealed. On cars where it is not sealed, check the transmission dipstick with the engine warmed up and running (see the owner’s manual for details). Also check the power-steering-pump dipstick (it’s usually attached to the fluid-reservoir cap) and the level in the brake-fluid reservoir. If the brake-fluid level is low, top it up and have the system checked for leaks.
6. Clean the radiator
Prevent overheating by removing debris with a soft brush and washing the outside of the radiator with a detergent solution,What Qualifications Of Oxyhydrogen Generator Should Possess.
201706089637.jpg
7. Check the battery
Check the battery’s terminals and cables to make sure they are securely attached, with no corrosion. If the battery has removable caps, check its fluid level every few months—especially in warmer climates.
engine block cleaning machine
carbon Kleaner

#2 Misc » What Qualifications Of Oxyhydrogen Generator Should Possess » 2017-10-16 09:40:40

local429
Replies: 0

What Qualifications Of Oxyhydrogen Generator Should Possess?
With the development of technology and society, the market of engine carbon deposit removal has become complex. There have been more and more kinds of ways to remove carbon deposits. From the aspect of safety,What Qualifications Of Oxyhydrogen Generator Should Possess, Oxyhydrogen Generator is the best way to do engine carbon deposits.
But the quality of Oxyhydrogen Generator in the markets is uneven. How can we select machine which is fit for us?
ECM.jpg
From the perspective of hardware, if the Oxyhydrogen machine has safety guarantees such as:
    316 stainless steel to avoid corrosion, even better to use 316L stainless steel;
    Over voltage protection;
    Cooling system and anti-backfire design to avoid fire;
    Automatic monitoring equipment to detect working status;
    Overheating protection to safeguard the machine from extreme temperatures;
    Water level probe to detect water level;
    The kind of Oxyhydrogen machine is better than others.
ISO.jpg
From the perspective of function, if the Oxyhydrogen machine has energy-efficient, using a small amount of electricity to produce a large number of gas and can continuous work for 24 hours.
From the perspective of software configuration, if the Oxyhydrogen machine has some certifications,What Qualifications Of Oxyhydrogen Generator Should Possess, it will let people feel more easily. There are two certifications that oxyhydrogen machine should have.
certification.jpg
CE: CE marking is a mandatory conformity marking for certain products sold within the European Economic Area (EEA) since 1985. The CE marking is also found on products sold outside the EEA that are manufactured in, or designed to be sold in, the EEA. This makes the CE marking recognizable worldwide even to people who are not familiar with the European Economic Area. It is in that sense similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States. The CE marking is the manufacturer’s declaration that the product meets the requirements of the applicable EC directives. The mark consists of the CE logo and, if applicable, the four digit identification number of the Notified Body involved in the conformity assessment procedure.
IOS: ISO 9001:2008 specifies requirements for a quality management system where an organization needs to demonstrate its ability to consistently provide product that meets customer and applicable statutory and regulatory requirements, and aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements. All requirements of ISO 9001:2008 are generic and are intended to be applicable to all organizations, regardless of type, size and product provided.
1766.jpg
engine cleaning sevice
decarbonizer

#3 Q & A » Carbon Cleaning Is Good Or Bad For Car Maintenance » 2017-10-12 09:16:26

local429
Replies: 0

What Is Carbon Cleaning? Is It Good Or Bad For Car Maintenance?
What is carbon cleaning? Is it good or bad for car maintenance? My friends always asked me these questions. Actually, the debate had long existed in the field of auto industry.
At first, I must tell you that engine carbon clean divided into two types: one is engine carbon cleaning for repair, the other is engine carbon cleaning for maintenance
As we all know, after our car ran one or two years (about20000 kilometers), the automobile engine will have performance degradation in different levels: economic performance degradation, fuel consumption increase, short of power, fast acceleration not free, start not smooth, especially in cold start, excessive exhaust emission, noise increase, the engine oil turns black fast or even slightly burned.
car-care.jpg
There is a saying that good:” three tenths repair and seven tenths maintenance.” If you had never maintain your car before 20000 kilometers, you will face some serious problems for car maintenance. In this case, you must do engine carbon cleaning for repair.
However, for my perspective, engine carbon cleaning for repair may do harm to auto engine. Because most auto service shop will use disassembling way or chemical way to do powerful engine carbon cleaning. The traditional machine of engine carbon cleaning such as dismantling carbon cleaning machine,Carbon Cleaning Is Good Or Bad For Car Maintenance, combustion carbon cleaning machine, chemical foam dismantling carbon cleaning machine and pure hydrogen carbon cleaning machine. Either way, it can definitely do some damage to the auto parts and engine. It will shorten lifespan for your car.
So, engine carbon cleaning must do prevention first. If you maintain your car regularly and pay attention to some maintenance details,Carbon Cleaning Is Good Or Bad For Car Maintenance, you can do engine carbon cleaning for maintenance.

At present, there are two newer machines to do engine carbon cleaning. Oxygen-hydrogen carbon cleaning machine can remove engine carbon deposit completely. Do it regularly can maintain your car and you may see some sewage when your car did engine carbon cleaning. But it not always effective and happened accident occasionally.
Another machine called HHO Carbon Clean Machine. It updated oxygen-hydrogen carbon cleaning machine. Not only upgraded machine materials and Safety Guarantee System, but also innovate to use HHO Carbon Cleaner Agent. It can completely wipe off carbon from engine and has absolutely effect of emission reduction. Specially, the HHO Carbon Cleaner Agent has an internal protection layer to protect the engine. Compare to others, it has continuing effect for engine maintenance.
All in all, engine carbon cleaning must in line with an emphasis on prevention. If you don’t want to buy a new car or chasing the fashion, you must do engine carbon cleaning regularly.
166878CA662631B21485D68CA7.jpg
engine clean machine
diesel carbon cleaner

#4 Application for GOTS membership » What Is The Highest Profit Service In Car Repari Business » 2017-10-10 09:35:11

local429
Replies: 0

What Is The Highest Profit Service In Car Repari Business?Do You Know?

Recently, Chinese researchers have developed a new technology to remove engine carbon deposit that avoids excessive exhaust emission if used improperly.
The new oxy-hydrogen generator named HHO Carbon Clean Machine, developed by a research team from the School of Mechanical Engineering at Hunan University, removes carbon deposit from auto engine through chemical methods.
20170608939.jpg
According to report, in next ten years, with the rapid development of global auto industry, auto engine carbon cleaning service will become the highest profit auto service.
Why?
As we all know, the demand for cars rapidly spreads in around world, surveys of demand for car shows that, for 5 years in future, global auto market will increase markedly. That means nearly one in five people have a car. Specially, in the field of luxury vehicles service,What Is The Highest Profit Service In Car Repari Business, engine carbon clean has rigid demand.
20170608101204.jpg
As HHO Carbon Clean Machine specialized in luxury vehicle engine carbon cleaning, it shows promising market prospect with its unique advantage.
Compared with general cars, luxury vehicles need more maintenance service. After removing carbon deposit from auto engine,What Is The Highest Profit Service In Car Repari Business, the effect is obvious. It will save more fuel, more than 15% and can improve engine power by 20%. It can give good accelerator performance and achieve emissions testing standard. It not only has environmental benefit but also has economic benefit.
Luxury vehicles have higher requirements for security. HHO Carbon Clean Machine is the pioneer of oxyhydrogen energy application and has the most advanced technology in the world. 14years research, with 49 technologies design, 186 production steps, 3years technologies research and development, 58 peoples technical support, and 16technical engineers, it has 10 safety guarantee: anti-fire relief valve, water level probe, stainless steel cooling fin, 316 stainless steel, imported switch, vibration transducer, pressure gage, electromagnetic valve, pressure valve, constant temperature. The ten safety guarantees ensure in the round security and accidents control target as zero accidents.
20170608968.jpg
best carbon cleaner for engines
carbon removal

#5 Misc » hho generator » 2017-10-06 09:45:26

local429
Replies: 0

,The exhaust of the vehicle has a fatal hazard to mankind
hho generator

Advantage:
1.No longer need to use dangerous and expensive hydrogen cylinders.
2. High purity hydrogen (99.999%~99.9999%), stable output flow, safe and convenient to operate, various alarm devices (overpressure alarm, water shortage alarm, water accumulated alarm).
3.Easy to operate, safe and reliable, generating hydrogen through electrolyzing pure water, switching power on to produce gas(available for several sets of gas chromatography).
4. High electrolysis efficiency. Gas purity and output flow will stay regular under continual use.
5. High reliability, easy to maintain.
6. No corrosion and pollution.
Application:
1. Cutting metals by oxygen flame
2. Gas welding and flame spray painting
3. Thermal processing of jewelry, especially good for platinum as oxy-hydrogen flame contains no carbon
4. Fine cutting, fusion, repair and local thermal processing of delicate metal parts.
5. Direct fusion of fine copper wire and enameled wire
6. Removals of carbon deposit in the combustion chamber of internal combustion engine such as cars
7. LED chip integration
8. The thermal processing of glass and quartz glass
9. Surface polishing of organic glass
10. Computer wire peeling
11. Burn with other fuels together for boilers, cooking stoves, melting metals.
What is the oxyhydrogen generator for boiler?
Oxy-hydrogen gas Generator is Energy Saving and no pollution product.
It consumes water and electricity, electrolyze water into H2 and O2,
we can use H2 and O2 as source of flame replacing acetylene or natural
gas or other fuel.
HHO generator applied in boiler will help the boiler make complete
combustion, and increase fuel efficiency between 10% to 30%, reducing
emission minimum by 60%.
Do you want to know more? Follow me!
what kind of technology can change water into fire?
1. The principle is based on the theory of electrolysis.
2. To electrolyze water into pure hydrogen and oxygen.
3. Oxy-hydrogen helps boiler complete combustion, which is economical,6 Ways to Save Money for Motorists,
reliable, safe and environmental
What is the Advantages of our oxyhydrogen generator?
Low Cost & Maximum Economy
Oxy hydrogen gas is generated only using electricity and pure water.
The cost of electricity and water reduces more than 40% compared with LPG,
Propane, and Acetylene fuel.
Both economical and practical. Energy Saving more than 30% compared
with traditional LPG, Propane, and Acetylene fuel.
High Temperature & high-energy
Oxy-hydrogen flame is straight, little heat loss and high efficiency.
The heat of 1kg hydrogen is 34000Kcal, triple gasoline. Hydroxide flame’s
temperature is up to 2800 degrees, which is higher than conventional liquid gas.
What’s more, the temperature is adjustable.
Maximum Safety
hho Gas is light and dissipates rapidly into the atmosphere compared to
acetylene, which is dense and seeks ground level.
Multiple safety devices, including overheating and in-sufficient water
cut-off switches, will automatically turn off power to ensure the safety
of both equipment and user.
A Healthier Working Environment
0 toxic fumes and 0 emissions of carbon based emissions.
Environmentally Friendly
hho Gas produces zero pollution when burning, while hydrocarbon-based
fuel gases pollute the environment.
Why we use oxyhydrogen generator for boiler?
HHO generator applied in boiler will help the boiler make complete combustion,
and increase fuel efficiency between 10% to 30%, reducing emission
minimum by 60%.
carbon removal
carbon cleaner

#6 Events » The exhaust of the vehicle has a fatal hazard to mankind » 2017-09-29 10:04:28

local429
Replies: 0

The exhaust of the vehicle has a fatal hazard to mankind!
Sometimes, we like things that are just plain weird and make very little sense in an otherwise sensible world. I have a friend who likes eating pieces of chalk, another who likes eating soil (I’m not kidding), and a third who likes the aroma of pesticide smoke. I can’t judge them too much, however, because as a child, I used to love the smell of gasoline, while some of my friends loved the smell of car exhaust fumes!
While such preferences are irrational and a bit odd, some are much more than that. For example, smelling (which in effect becomes inhaling) car exhaust gases is extremely harmful to the body. In the most extreme cases, it can kill people who are exposed to large doses.
%E5%9B%BE%E7%89%871-1.png
Why is inhaling car exhaust fumes harmful to us?
Short answer: Car exhaust fumes contain certain poisonous chemicals, including carbon monoxide, sulfur dioxide, nitrogen oxides, formaldehyde, benzene and soot, all of which can be detrimental to the human body if consistently inhaled in large quantities.
Exhaust gases
As you already know, the vast majority of vehicles need oil/gas to power its engines, allowing certain mechanical and chemical reactions to occur and run the vehicle. All that stuff that goes on under the hood of a car (primarily the combustion of the fuel) releases a mixture of gases and suspended particles, which we collectively refer to as exhaust gas.
%E5%9B%BE%E7%89%872-1.png
Exhaust gases released by a bus (Photo Credit : Pixabay)
Exhaust gas accounts for the majority of an automobile’s emissions, as it is mainly released as a byproduct of the combustion of certain fuels, such as diesel, petrol, natural gas, fuel oil etc. The exhaust gas of a vehicle is removed from the vehicle and released in the environment through what is known as the exhaust pipe or propelling nozzle.
Exhaust fumes are notorious for being unhealthy both for humans and the environment, due to the presence of certain chemical substances that are all too well known for being harmful to humans. It should be noted that not all components of exhaust fumes are harmful; they also consist of non-toxic components,Did You Hear the Moans and Cries of Your Car, such as nitrogen, water vapor and carbon dioxide (although that is a greenhouse gas and a chief contributor to global warming).
In this article, we will look at some of the undesirable and toxic components of exhaust fumes one at a time:
Carbon monoxide
No discussion pertaining to car fumes and its dangers can be complete without mentioning this hazardous gas. Carbon monoxide is a colorless, tasteless and odorless gas in itself, and is one of the chief culprits that make exhaust fumes hazardous to human health, as it binds to the haemoglobin in our blood, which results in suffocation.
If exposed to even a minuscule amount (0.0035%) of carbon monoxide constantly for 6-8 hours, one will start experiencing the initial symptoms of carbon monoxide poisoning, which include lightheadedness, confusion, dizziness and headache. It increasingly becomes worse as the concentration of the gas in the air rises.%E5%9B%BE%E7%89%873-1.png
At the end of the spectrum of its adverse effects is death of the exposed individual in less than 3 minutes, if its concentration in air is 1.28% (12,800 ppm) or more.
Hydrocarbons (benzene)
Exhaust fumes contain certain hydrocarbons (compounds containing chains of hydrogen and carbon atoms), particularly benzene, which has dangerous consequences to our health both immediately and over the long term. As a well-known carcinogen (something that causes cancer), benzene is known to severely impact bone marrow, which could lead to a drop in the number of red blood cells, leading to anemia.
According to the Department of Health and Human Services (DHHS), benzene can cause cancer of the blood-forming organs (or leukemia) if one is exposed over a long period of time.
Sulfur dioxide
A colorless gas with a sharp, pungent smell, sulfur dioxide irritates the organs of the respiratory tract, including the nose and throat, causing wheezing, coughing and shortness of breath. In the long run, prolonged exposure to sulfur dioxide has been associated with asthma and other similar conditions.
Soot
Soot is that powdery stuff that makes exhaust fumes black.
%E5%9B%BE%E7%89%874.png
That’s pretty much what soot is (on the outside, at least). More specifically, it is mass that is left behind as a result of the incomplete combustion of hydrocarbons.
The detrimental effects of soot are too many to list, but they include influenza, asthma and even cancer. Soot deals a nasty blow to the respiratory organs of people who are constantly exposed to it. It’s also associated with acute vascular dysfunction and an increased risk of coronary artery disease.
Soot hurts the environment too (as do the other chemicals listed above). In fact, soot is so bad for the environment that it accounts for over one-quarter of the total hazardous pollution in the air!
%E5%9B%BE%E7%89%875.png
In a nutshell, it’s pretty evident that exhaust fumes, regardless of whether they come from a small car or a giant manufacturing plant, are doing some really serious damage not just to us, but to the whole environment. It’s wise, therefore, that we do our best to limit our own emissions as much as possible. And in the meantime,6 Ways to Save Money for Motorists, shake the habit of smelling the exhaust fumes of cars!
Of course, not to say there is no way to reduce emissions.
%E5%9B%BE%E7%89%876.png
Recently, China unveils a new technology which innovation removes engine carbon deposit by the newest oxy-hydrogen generator.  The new technology removes carbon deposit in auto engine with it catalysis principles and innovative uses HHO Carbon Cleaner Agent which can not only enhances the carbon clean effect in three-way catalyst and exhaust pipe but also protects the engine parts and extending the engine life as well. After decarbonizing, the car can save fuel by 15%, improve engine power by 20% and reduce emissions by 72%.
%E5%9B%BE%E7%89%877.png%E5%9B%BE%E7%89%878.png
Atmospheric pollution is present all around the world. Some countries have controlled it successfully,  But many countries do not pay attention to the situation of excessive emissions, where more effort and proactive measures are needed. In these circumstances, one thing that is urgently needed is an international, integrated and functional communications platform that encompasses policymaking, academic study, industrial planning and economic restructuring.
carbon remover
best carbon cleaner for engines

#7 Events » Did You Hear the Moans and Cries of Your Car » 2017-09-28 08:42:32

local429
Replies: 0

Did You Hear the Moans and Cries of Your Car?

My best friend Rick got married last month and he decided to take a self-driving tour with his wife as their honeymoon trip.
Sounds great and pretty sweet right?
However, Rick complained to me that this trip was like a nightmare for him! Why would a lovely honeymoon become a horrible nightmare? Is this because of his bride? No, actually the “chief culprit” is his CAR.
%E5%9B%BE%E7%89%871.png
Rick told me that during this self-driving trip, his car flamed out for 12 times and it usually took 15 minutes to restart the engine. Also, they did not have any time to appreciate the scenes along the way because they were busy to looking for gas station all the time, for the fuel consumption of the car is too large. While the most horrible thing was they were nearly killed by the sudden failure of brake.
%E5%9B%BE%E7%89%872.png
Rick’s honeymoon trip was totally destroyed by his car.
But why? Why would his car become like this,6 Ways to Save Money for Motorists?
The answer is: his car Got Sick.
%E5%9B%BE%E7%89%873.png
Yes, our cars will get sick just as us.
If below phenomenons appeared on your cars, then you may need to find a “doctor” for your car.
    Suddenly Flame Out
    Abnormal Sound
    Abnormal Color of Exhaust Smoke
    Over-heat Temperature
    Excessive fuel consumption
    Usual Smell
The cause of these problems is: Engine Carbon Deposition.
How to solve these problems?
You just need to take a shower for your car with our machine: HHO Carbon Clean 6.0.
Say goodbye to annoying noise,6 Ways to Save Money for Motorists. Say goodbye to exhaust pollution. Say goodbye to potential security danger. Restore the youth of your car!
engine cleaning products
carbon removal

Board footer

Powered by FluxBB